8
INSTALLING THE SOLAR PANEL(S)
PLEASE READ THROUGH ALL THE DIRECTIONS BEFORE PROCEEDING WITH STEP 1.
1.
Selecting a location on your roof. The ideal location is a flat surface, free of shade, as close as
possible to a dedicated outdoor outlet.
NOTE: It is highly recommended that you perform these setup instructions with two people.
2.
Remove the unit from the box and remove all packing
materials.
3.
Place the unit(s) on the ground. Lay the unit glass-side
down being very careful not to damage the glass.
4.
Find the bolts which attach the “Z” brackets to the base
of the unit. The unit is shipped with the legs attached to the
base in the “shipping” position. (See Figure 1).
5.
Loosen the bolts and rotate the “Z” brackets so that flaps
are facing out andtighten them. (See Figures 2)
Shipping Location
Figure 1
Installation Location
Figure 2