6
(1A) Momentary power switch– Push to Talk.
(1B) Continuous power switch– Slide up to lock on and
then talk.
(2) Power indicator –lights "green" when the power is
turned either momentary or continuous.
(3) Microphone (audio pickup) - speak into this
part of the microphone.
(4) Infrared signal emitters — the infrared signal
is broadcast from multiple infrared signal emitters.
(5) Battery case— Slide the battery cover down to re-
move.
(6) Charging terminal—charging input for charging the
batteries with the AC Adapter or the battery
charger
(7) Charging indicator—The charging indicator pro-
vides a "red" light to indicate the following condi-
tions when the power switch is off and the micro-
phone is being charged.
◎
Charging: Flashing slowly
◎
Finished Charging: Continuously ON
◎ Charging error (trying to charge an alkaline
battery : Flashing very fast
(8) External Auxiliary input terminal (on the side) - Used
to connect a CD or MP3 player or other device. Allows
the user to wirelessly connect a source to the system.
(9) Single “AA” NiMH rechargeable battery or non-
rechargeable Alkaline battery.
(10) Channel assignment switch. Channel switch (inside
the battery case) - Set the channel of the infrared wire-
less microphone to the desired channel.
◎
Channels 1 or 2 for use with Actisound 75,
100, or 200. Channels 1 through 4 for use
with Actisound 300.
●
Uses two Panasonic NIMH AA rechargeable batteries.
●
Use the specialized battery charger "*****" or the AC
adapter for charging "*****" the NIMH batteries.
Charging time is approximately four hours but may vary
depending on the conditions of the battery.
1B
9
7
3
4
8
2
10
5
6
Operating Controls
STUDENT MICROPHONE
1A
Содержание ActivSound 75
Страница 1: ......