promethean ActivConnect PRM-ACON1-01, Инструкция по установке и эксплуатации, Страница: 14 / 24

Configure
Configuring your network
ClassFlow Connect allows dual simultaneous network
connections. In Networks you can enable and disable each
network adapter.
IMPORTANT NOTE: To wirelessly mirror via Miracast or Intel WiFi,
the wireless adapter must be enabled. Better performance
is achieved if the wireless adapter is affiliated to a wireless
network. If you choose to connect your device to a wired
network, make sure that you DO NOT disable wireless.
You may simply leave wireless enabled but disconnected from
a network.
If you are having trouble finding your wireless network in the list
then try using the “Refresh Network List” button. You may have
a network which is not broadcasting a SSID and you will need
to set up a profile consistent with your network. Your network
administrator may need to assist in these special cases.
IMPORTANT NOTE:
IP Multicast MUST be enabled for your
ClassFlow Connect device to work with Apple and Windows
7/8 laptops, smartphones and tablets. If you do not see the
ClassFlow Connect device on your network when trying to
mirror, your network administrator may have disabled this
feature. Please contact your network administrator to verify
that IP Multicast is enabled on your subnet and that all devices
you are looking to mirror are on at least one of the two network
subnets your ClassFlow Connect device is affiliated with.
Software updates
Your ClassFlow Connect has a future ready design. You can
check for and install updates through the Software Update
option in Settings .
14 ClassFlow Connect Installation & User Guide