- 2 -
Clearance between the needle and
the shuttle hook point (Shuttle race position)
Standard
•
The shuttle race should be positioned correctly with respect to the turning direction of the shuttle race..
•
Clearance between the needle and the shuttle hook point should be 0.02 to 0.1mm.
Adjustment
•
Set the pattern selection dial to 6
.
•
Turn the balance wheel to set the needle and the shuttle hook to the correct timing position
.
•
Turn the needle bar supporter stud
slightly to either the right or left and adjust the clearance
between the needle and the shuttle hook.
Note: The center of the needle should align with the center of the shuttle hook shaft.
www.promelectroavtomat.ru
