#34 Series Monopod Breakdown
TR34M / TR34ML Core Features:
•10x Layer Carbon Fiber
• Precision Machined Top Apex with 1/4-20 and 3/8-16 threaded adapter screws
• Aluminum Leg Locks
• Rubber Over molded Foot w/ Stainless Steel Spike
• #C40 Arca Compatible Clamp Compatible (sold separately)
The ProMediaGear 34 Series Monopods are designed around our 34mm 10x carbon
fiber legs and features a flat traditional base with reversible 1/4-20 and 3/8-16
threaded adapters. The 34 Series also features the opportunity to remove the top
flat base and substitute with our #C40 Arca Compatible Clamp (sold separately). The
TR34M and TR34ML is completed with aluminum leg collars and a stainless steel
spike built into the foot. The TR34M and TR34ML are compact 4 section monopods.
TR34M / TR34ML
Reversible Thread Adapter
1/4-20 and 3/8-16
TR42M / TR42ML
Built-in, Aluminum
Arca Compatible Clamp
Optional Clamp Set-up
The TR34 Series Monopod has the opportunity to spin off the flat base
top and install an Arca Compatible #C40 PMG Clamp. If interested
remove the flat top by spinning counter clock-wise. After you remove
the top and screw you will notice there are 2 lips milled into the top of
the monopod. Lay the #C40 clamp across the lips and onto the base.
Secure with clamp with the #A19 clamp screw (sold separately).
#A19 Screw
(sold separately)
Clamp Grooves
#C40 Clamp
(sold separately)
