Mount the #HM1 onto your Monopod in 1 of 3 ways.
Screw your Monopod with a 3/8-16 screw into the bottom center of the #HM1
Monopod Tilt Head Base (G). Tighten until snug.
Screw your Monopod with a 1/4-20 screw into the bottom of either of the (2)
mounting positions available on the #HM1 Monopod Base (G). Tighten until snug.
Lock the #HM1 Tilt Head onto an Arca Compatible Clamp using the Arca
Compatible Mounting Base (F).
Holding your camera and lens securely, mount your Arca compatible lens collar
plate into the #C60 Clamp (A) and tighten. For cameras without a lens collar plate
we suggest the ProMediaGear #PXC2 8" Rail with Clamp, sold separately. This
will allow you to mount to an Arca Compatible Plate on your camera and create
a rail under your lens that will allow proper positioning on the #HM1 Tilt Head.
Never let go of your camera and lens until everything is secured and tightened.
Adjust the Friction Knobs (C) to fit your shooting style. We suggest using the
larger ball knob for fine adjustments and the thumb knob to firmly lock down the
#HM1 Head.
Instructions
A. Arca Compatible #C60 Clamp with Spirit Level
1.
2.
3.
B. Clamp Lock Knob
C. Locking Knobs
G. 3/8-16 Threaded Mounting Adapter
F. Arca Compatible Base
E. Pivot Point
(2) 1/4-20 Threaded Mounting Adapters
#HM1,
Tilt Head Mounting and Functionality
