ProMed HGP-1.7, Инструкция

Страница: 11 / 80

Problem Cause Troubleshooting
The device does not
warm up.
The device is not connected to
the power supply system Insert the power plug into the power
socket and switch on the device
The device is not switched on Switch on the device
The device is defective Send the device to the manufacturer
On the controller
display screen, the
letter “E” is shown
The heating belt and the controller are
not, or not correctly connected to each
other
Connect the plug of the controller
(G)
to the
plug of the heating belt
(H)
The device is defective. Send the device to the manufacturer
• Before cleaning the heating belt, the power plug must be disconnected from the power socket.
•
The heating belt can be washed by hand or in the washing machine at 40°C using a mild detergent.
• Do not iron the heating belt.
• Please do not use any detergents containing chlorine.
• Do not dry clean the heating belt.
• The heating belt cannot be tumble dried.
• Do no use any high-pressure cleaners.
• Make sure that the controller does not come into contact with any liquids. Liquids may result in damage.
• Never use the heating belt while it is wet or damp. The heating belt must not be switched on while it is
drying.
• Let the heating belt air dry. Do not use any auxiliary means (such as clothes pegs) to hang it up to dry. This
may damage the cables inside.
Storage and regular inspection
• Do not crumple the heating belt.Carefully fold the product to store it.
• Store the device in a dry place when it is not in use.
• Allow the device to cool before you fold or roll it up.
• Examine the appliance frequently for signs of wear or damage. If there are such signs, if the appliance has
been misused or does not work, return it to the supplier before switching it on again.
• Please do not use any chemical moth protection.
• Do not place any heavy objects on the device during storage, as this may damage the electrical wiring.
• In the event of malfunction or defects, send the device to the manufacturer.
Please note the following aspects prior to any commissioning:
A. The heating belt may only be used with the controller supplied.
B. Voltage supply of the heating belt: 220 - 240V~.
C. If any problems occur with the heating belt, please send it to the manufacturer.
D. Only for indoor use.
E. When using an electrical device near children, conscientious
supervision is required.
TROUBLESHOOTING
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
SAFETY INSTRUCTIONS
CARE INSTRUCTIONS