SA
Message Description
"LOW BATTERY"
-
"VERY LOW BATTERY"
The equipment will be switched off automatically.
"LNB SHORT CIRCUIT"
The LNB can be short circuit.
"LNB OVER CURRENT"
The LNB has a high consumption.
"MANUAL POWER OFF"
The instrument has to be switched off by hand.
"AUTO POWER OFF"
The instrument will switched off after five minutes of
inactivity.
"SERVICE MODE"
-
"BATTERY MODE"
-
"UPDATE MODE"
-
“NETWORK NOT FOUND”
-
“SERVICES NOT FOUND”
-
"LNB NOT DETECTED"
Power level is below the minimum necessary to detect a LNB
(this value can be adjusted by software, usually 10 %).
"FULL BATTERY"
-
"MPEG-2 NOT DETECTED"
It is not detecting the Transport Stream signal MPEG-2.
"LOADING NETWORK"
-
"LOADING SERVICES"
-
"HIGH TEMPERATURE"
The running temperature is too high. The equipment must
be switched off for a while. If the problem persists, contact
with the technical support.
At right top corner, next to the messages, the following icons may appear.
Icon Description
Charging battery.
Battery state.
18/13/OFF
LNB power supply. ( 13 V, 18 V or OFF).
22 KHz signal activated.
,
or
The DVB-S, DVB-S2 or DSS has not been
synchronized.
,
or
The DVB-S, DVB-S2 or DSS has been
synchronized.
Manual Power Off.
USB
USB connected to the PC.
- 0 DG0078 -
P.8
