Promax RP-110, Руководство пользователя

Страница: 48 / 90

USER’S MANUAL. RP-110
10-2010 Página 12
Three lines below the horizontal axis of the graph indicate the range covered by
each one of the frequency bands listed above.
Press the key SEL [3] to move from a digit to another.
Press the cursor key UP or DOWN [4] to change the digit.
c) POWER LEVEL
It defines the power to which the selected pilot signal is emitted.
Press the key SEL [3] to move from a digit to another.
Press the cursor key UP or DOWN [4] to change the digit.
The acceptable range of valour’s are from 80 to 110 dB
µ
V in 1 dB steps.
d) ENABLED / DISABLED SIGNAL
It allows you to enable or disable the emission of the signal.
Press the cursor key UP or DOWN [4] to switch from enabled signal
to disabled.
When a pilot signal is enabled it appears on the screen with a solid color. When
it is disabled it appears with dashed lines.
For example, to change the settings of the pilot signal number four (P4), you
should press the selection button [3] until the first field of the parameters list is
shaded. Then press the cursor keys UP or DOWN [4] until selecting the pilot
signal number four ( P4 ). Press again the selection key [3] to select the parameter
you want to change and enter the new value using the cursor keys UP or DOWN
[4].