Promax RANGER Neo 2, Руководство пользователя

Страница: 221 / 349

October 2021 209 Chapter 9: INSTALLATIONS MANAGEMENT
DiSeqC commands, data captures, signal monitoring, service databases
and antennas (or all).
„
File
•Mark All: It marks all files on the list of files area.
•Unmark All: It deselects all files on the list of files area.
•Delete: It deletes all selected files on the list of files area.
•Copy to USB: It saves selected files on the list of files area to an USB stick
connected to the equipment.If the name of the file to be copied is greater
than 8 characters the system cuts it. If the file name is cut and matches
with another one, then it is added a number to the name to make them
different. For instance, 2 files with similar names, like FILENAME01 and
FILENAME02 both files will be correctly copied with names FILENA~1 and
FILENA~2. To keep the file names with more than 8 characters it is
recommended to export the complete installation using the "Export to
USB" option (see "Tools" section). The Datalogger files copied to the USB
cannot be used to generate reports by the NetUpdate program. To do this
the datalogger files must be exported directly through the NetUpdate
program (for more details refer to NetUpdate manual on PROMAX
website ).
•Send via mail: It allows you to send files, selected from the file list, via e-
mail. Mail server parameters must be defined on the SMTP tab at
Preferences (for more details refer to “?SMTP Options” on page 55 ).
„
Installation
•Add Channel Plan: It opens a window to add a channel plan, terrestrial or
satellite and band (for optical option), to the current installation.
•Add Antenna: It allows the user to add an specific antenna among the
ones available. To import an antenna refer to "Field Strength" section in
chapter "Tools".
•Add DiSEqC program: It allows the user to select and add to the current
installation any DiSEqC program available in the equipment.
„
Options: This option appears if there is any extra option associated
with the file type.
•See Full Screen: This option only appears if user selects an image in the
list of files. It displays the selected image full screen.
•DiSEqC Program: This option only appears if a satellite channel plan is
selected in the list of files area. It allows the user to add a Diseqc program
Sending files by e-mail via WiFi
S
C
A
N