Promax DT-504B, Быстрое руководство по настройке

Страница: 8 / 14

QUICK CONFIGURATION GUIDE. DT-504B .
11/2012 Page 7
3
NAVIGATION AND EDITION OF VALUES
3.1 Control Module
The DT-800 control module configures the DT-504B module:
1.-
After assembling and connecting, turn on the
DT-800
. After
scanning, check the DT-504B module appears in the list of
modules shown on the screen.
2.-
Press
ENTER
to get into the
Password
option and enter the
access password (password by default “2008”). If the password is
right you will access to the configuration menu.
3.-
Use
RIGHT
or
LEFT
to move among modules, until
finding the
DT-504B
. The LED “
Program
” of the
DT-504B
module should be flickering when the module appears on screen.
4.-
Press
ENTER
to get into the configuration option of the
DT-504B
.
For more information, refer to the manual supplied with the
DT-800
unit control.
3.2 Navigating through the configuration menu
• Press the LEFT or RIGHT key to move between menu
options.
•
To get into a menu option, press the
ENTER
or
DOWN
key.
•
To validate a change and exit, press the
ENTER
key.
•
To exit without validating press the
ESCAPE
key.
3.3 Editing a numeric field
1.-
Press the
ENTER
key to get into a menu option.