background image

 

November 2018 

1

 

 

 

DVB-S/S2 TO DVB-T2 TRANSMODULATOR 

CompactMax-2 
CompactMax-3 

 

1

 

INTRODUCTION 

 

1.1

 

 

Description

 

 

The 

CompactMax

 is a compact transmodulation system that allows you to 

distribute Satellite TV channels (DVB-S or DVB-S2) in Second Generation Digital 
Terrestrial Television (DVB-T2) format. 

The 

CompactMax

 has 4 satellite inputs

 

and 4 DVB-T2 independent outputs. Two 

inputs are for free channels and the other two inputs for encrypted channels. 
There are also two slots to insert a Card Access Module (CAM)* to decrypt these 
channels and one input for RF loopthrough. 

The 

CompactMax

 extracts the sequence of digital data (Transport Stream) of 

DVB-S/S2 signal. TS tables are regenerated (PAT, PMTs, SDT and NIT) and PID 

remapped. Then signal is modulated again in DVB-T2 format, in order to 
distribute it at frecuencies between 47 and 858 MHz with a resolution of 1 kHz. 
After going through this process, there are 4 DVB-T2 independent signals that 
can be inserted into a television distribution network. The output signal has high 
quality, allowing its way through multiple amplifier stages, drifters, long cables, 
etc. 

The 

CompactMax

 is managed through a webserver via remote control (LAN or 

internet) and it is compatible with any standard browser. The webserver is easy 
to use and has multiple setting options. 

The 

CompactMax

 is integrated into a 19” (1U high) rack-mount case, which fits 

in any TV head-end installation. It can also be mounted directly on the wall.  

Among the practical applications of this transmodulator are: 

 

Filter services in order to choose what DVB-S/S2 channels will become 
DVB-T2. 

 

Restoration of quality in a weak signal. 

 

To move DVB-T2 channels from one frequency to other. 

 

To change a programme grid without need to retune every TV on the 
system. 

 

To avoid degradation of signal. 

 

To avoid overlapping on other channels. 

 

To distribute encrypted programmes as free view in an internal TV 
network.* 

 

To use as a TV repeater to cover shadow areas. 

 

 

*

 only available for CompactMax-2 

Содержание CompactMax-2






























Отзывы: