background image

6

Daily Operation

Always allow 30 minutes of preheat time before loading the unit with product.  Failure to allow 

sufficient preheat time will result in unsatisfactory cooking of the first load.

Check the power cord to insure that it is plugged into a proper outlet.
Check that the switch and thermostat control are turned on.
Set the unit's ON/OFF rocker switch to desired position.
Set the thermostat control knob to desired temperature.

Operating Hints And Safety

Disconnect power to the unit with the switch at the end of each day of operation.
Do not leave the unit in operation without an attendant.
Turn thermostat down to 200°F (93°C) during idle periods.  It will take only a few minutes to regain 

operating temperature.
Use spatula to push excess grease into grease drawer after each load of food is cooked.  This will 

reduce smoking of hot grease and carbonizing.
Do not leave the unit at high temperature when not in use or during idle periods.  This will cause food 

particles and grease film to carbonize.

"Season" cooking surfaces with non-salted vegetable oil to reduce product sticking.

Monthly Lubrication/Inspection

Apply two (2) drops of non-toxic mineral or vegetable oil to counter balance shoulder rivets and plastic 

spacers.

Check and clean brass rollers to make sure they are rolling and not sliding on the cam 

surfaces of the counterbalance.
Check the bolts, screws and nuts, tighten if necessary.

Cleaning

Begin cleaning procedure by using the operating procedures within your organization, or follow the 

steps below:

1.  If particles adhere to the cooking surface during the day, scrape them off with a spatula.
 

NOTE:

  It is best not to let food cook onto the grill, as food build-up on the grill will increase 

sticking and smoking.  In addition, carbon may build up on the grill surface and reduce the 

cooking efficiency.  

Carbon Buildup:

 

A black matter that forms on or near the cooking surface.  Generally this is a 

combination of: releasing agents, oils, food particles etc. ,that have cooked to the surface.  After a 

period of time without cleaning, this will reduce performance and material may start flaking off.  When 

that happens, follow the "Carbon Cleaning" procedures.

2.  At the end of the day, wipe down all surfaces with a warm, damp cloth and mild detergent, then 

dry.

Carbon Cleaning

When carbon build up occurs, use a carbon removal agent (safe for aluminum surfaces)  according 

to the instructions provided with the cleaner.  When this process is complete, you must re-season the 

grill according to your company/corporate guidelines, or the seasoning instructions in this manual.

DO NOT IMMERSE OR LET THE UNIT STAND IN WATER.

Содержание CG28 SERIES





















Отзывы: