background image

1.

 

SAFETY 

1.1 SAFETY  RECOMENDATIONS 

 

Unsafe practices or unauthorized modifications of machine could result in accidents or property 

damage. 

 

For safe installation, operation, handling and maintenance, please strictly follow the simple safety 

rules stated below and take precautions. Failure to follow these safety rules and take necessary 

precautions can result in serious injury or death as well as cause damage to the equipment. 

 

1)  Never operate or service your Promax / Promarks machine until you have read this manual 

completely and understand it fully. 

 

 

2) All adjustments and repairs must be carried out only by qualified technicians or maintenance 

personnel. 

 

 

3) No service work should be attempted until the machine’s power has been turned off. 

All proper lock out / tag out procedures should be followed. 

 
 

4)  Do not put tools, parts or other foreign objects on or into the machine. 

 

 

5) Always keep the machine clean, lubricated and in good working condition. 

 

 

6) To provide protection against the risk of electrical shock the power connection must be 

properly grounded at all times. 

 

 

7) The machine should alwa ys be operated on a flat stable surface. 

 
 
 
 

8) A certified electrician should be emplo yed to install the permanent electrical 

connections for your new machine. 

 

 

   

 

 

Содержание BT-800K

































































Отзывы: