10
Adjusting the Spread of the Targets
When launching doubles, the spread
of the clays is adjustable.
Loosen the wing-nut on the underside
of the casting plate and pivot the
back rail forwards to reduce the
spread, or backwards to increase the
spread of the clays. Retighten wing
nut once adjusted to desired position.
Tilt Adjustment
Setting the Targets at the Same Height
The Signature ATA has been designed so that both clays come off the machine at
the same height , this can be achieved by easily levelling the machine. The machine
can quickly be re-levelled if physical or climatic conditions change.
Setting the targets at the same height is achieved by tilting the trap either to the
left or to the right by using the Tilt Adjustment hand wheel.
Tilt Adjust
To lower Right-hand targets
Turn hand wheel clockwise
To lower Left-hand targets
Turn hand wheel anti clockwise
The Tilt Adjustment is fitted with locking collars.
Set the machine on single clay, set the flight of
the clay level and lock off locking collar.
Change machine to doubles, set flight of clays
level and lock off using second locking collar.
With the Ideal positions for singles and doubles
now pre-set, the trap can be quickly adjusted
using the hand wheel up to the appropriate stop.
Wing nut
Back Rail
Casting Plate
