Promate KeyCover-Air, Руководство пользователя

Страница: 5 / 7

Plug the USB cable included to a USB port and the other end into
KeyCover-Air’s charge jack. Charging Status LED will light up red while it is
charging and when fully charged turns off. When battery is low, the Red LED
will start blinking. When this happens, kindly charge KeyCover-Air
immediately. Before using the Bluetooth® Keyboard for the first time ensure
that it is charged for at least 2-3 hours.
3. Charging
Operation Instructions:
4
1. Basic Operation
• Power switch: Located on the keyboard, switch it to turn KeyCover-Air
• Turn the keyboard on by sliding the Power On/Off Switch to the” On” position.
• Activate Bluetooth® on your iPad Air, by going to settings, taping on the
general tab, going to the Bluetooth setting and turning it on.
• Set it to search for new devices.
• To activate pairing mode on KeyCover-Air, press the Bluetooth
Connection Key until the Blue LED indication begins blinking.
• Select "KeyCover-Air" from the list of found devices on your
iPad and connect.
• Enter the 4 digit passcode shown on your iPad Air using the Bluetooth
keyboard to pair and connect KeyCover-Air to your device.
2. Bluetooth® Pairing Mode