![Promaster XtraPower Скачать руководство пользователя страница 2](http://html.mh-extra.com/html/promaster/xtrapower/xtrapower_operating-instructions_1615936002.webp)
to fit into the output socket of the connector-cable in only one direction.
3.
If the adapter plug you are going to use is the barrel (round) type,
please remember that the
adapter plugs included in this universal power adapter kit are all set in a center
positive position alignment (as illustrated in Diagram A, below). If your device
requires a center pin negative power source (as shown in the following Diagram B),
please do NOT use it.
C. Insert the adapter plug into the DC “IN” socket on your portable
electronic device.
D. Unfold the AC prong as shown in
Fig. 3 (left)
and plug the universal
power adapter into a standard household AC outlet. (To use this product in
a car, connect the 12V car cord with the power adapter as shown in Fig. 1
(previous page) and plug the car cord into a 12V car lighter receptacle). The
blue LED power indicator on the front of this power adapter should turn on
to indicate it is ready for use.
IMPORTANT:
Your portable electronic device must be rated between 3 - 10V DC to use this universal power adapter. The voltage setting on the
PROMASTER XtraPower Universal Digital Camera Power Adapter must be identical to the DC IN voltage your portable device requires.
If the exact voltage for your device is not available from this power adapter and is less than 10V, you can try setting the voltage switch to
the nearest voltage – use the lower setting first. If the device does not operate, disconnect the connector from the device, reset the voltage
switch to the next higher setting and re-connect.
If it still does not operate, please do not continue trying higher settings further as
they may result in damage to your device or the power adapter.
NOTES:
The PROMASTER XtraPower Universal Digital Camera Power Adapter will get warm during regular operation.
Specifications:
Input :
100~240V AC, 60Hz
:
12~18V DC, Min. 16W
Output rating :
3.3 / 4.2 / 5.0 / 6.5 / 8.4 or 9.5V DC
Length of output cord :
1.5 m
Operation Temp :
32 to 113 degrees F
Storage temp. :
-4 to 140 degrees F
Dimensions :
4” x 2.1” x 14”
**
The above mentioned brand names and trademarks are the property of their registered owners.
Made in Taiwan