Using the GH25 Gimbal Head
Mount the GH25 to your tripod using its 3/8” threaded mounting hole. If your tripod has a locking screw
in its mounting platform use it to securely hold the GH25 in place.
Attach the 7502 quick release plate to your camera or lens using the1/4-20 mounting screw. A small
folding handle on the head of the screw can be used for tightening or an allen key can be inserted into
the screw head.
Open the jaws of the GH25’s quick release received (located in the camera cradle portion of the GH25)
using the red knob with black, knurled rubber grip. Affix your camera/lens by aligning the 7502 plate
with the GH25’s quick release receiver. Slide it forward and back until you find a good balance point.
Tighten the assembly using the red & black knob.
Note: You can use the white arrow on the side of the 7502 plate in conjunction with the numbered scale
on the Q/R receiver to remember and realign your camera/lens in the future.
Use the two large, winged, red knobs on the GH25 to adjust the vertical height and horizontal swing of
your camera setup. Ideally you want to make these adjustments to find the vertical and horizontal center
points of your camera/lens combination. This way you can move the camera without affecting the
framing via the swing axis. Numbered scales are provided to easily find and repeat your adjustments in
the future.
Loosen the small winged, red knob on the base of the GH25 to freely pan your camera. Loosen the large,
indented red knob at the top of the GH25 to freely swing your camera up and down. With these knobs
loosened you can quickly frame a subject even using a long lens.
Combining the PH25 and GH25
Mount the 8020 quick release plate to the bottom of the GH25 using the included
¼
-20 to 3/8” thread
adapter. Now, with the PH25 mounted to your tripod, connect the GH25 to the top of the PH25 using the
PH25’s quick release receiver.
Use the two, large, winged, red control knobs on the GH25 to align the vertical and horizontal axis of
your camera for your lens’s specific nodal point.
If you wish to convert from panoramic photography to fast-action gimbal photography simply tighten
the pan knobs of the PH25 and loosen the small winged knob and large, indented knob on the GH25.
ONE YEAR UNCONDITIONAL WARRANTY
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this
product to your ProMaster dealer and it will be exchanged for you at no charge. ProMaster products are
guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at any time after one
year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for
evaluation.
Code 7201
Made in China
WWW.PROMASTER.COM | FAIRFIELD, CT 06825
