Installing the batteries
1.
Turn off the power on your camera and the ON/OFF switch (10) of the grip. Turn the battery compartment release lever (13) counter- clockwise to
open the battery chamber door.
2.
Remove the battery holder from the grip. The LP-E6 battery holder (22) comes pre-installed when shipped.
3.
For LP-E6 Li-ion Batteries: Matching the indentations on the battery with the LP-E6 holder, Press the battery down and slide it in the direction of the
arrow until the power terminals click into place.
4.
For AA Batteries: Place eight AA batteries of the same type into the AA battery holder, ensuring that they are in the correct orientation. Mixing battery
types, or using fresh and used batteries together could result in deteriorated performance or damage to the grip.
5.
Insert the battery holder into the grip. Close the battery chamber and then turn the release lever clockwise to lock. Turn on the camera and check the
battery level in the control panel or viewfinder.
One Year Unconditional Warranty
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your ProMaster dealer and it will be
exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at
any time after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation.
Specifications
Power Sources
2 x LP-E6 or 6xAA batteries(LR6, HR, FR)
Compatible Cameras
Canon EOS 5D Mark III
Replacement for
Canon BG-E11
Operating Temperature
32~104
°
F/ 0~40
℃
Dimensions
Approx. 6.06x4.57x3.35”/154x116x85mm
Weight (without batteries)
Approx.9.2 oz./260g (Excluding AA battery holder)
*
All the trademarks are the property of their respective owners
*
Specification and design are subject to change without notice
Code 3662
Made in China
WWW
.
PROMASTER
.
COM
|
FAIRFIELD CT
06825
