2016 & 2017 PROMASTER REAR SPEAKER
INSTALLATION
10.
Switch off the radio, turn the ignition key off and remove it from the ignition.
Disconnect any service tools from the diagnostic connector and close all doors.
Wait 10 minutes to allow all vehicle electronics to power down internally.
11.
Turn the ignition key on and turn on the radio. Rear speakers should now be
enabled. Verify by accessing the
AUDIO
menu. If the rear speakers have been
enabled, the
FADE
selection will appear and the rear speakers will be active.
NOTE:
Should you desire to remove the rear speakers at a later time,
you can repeat the steps listed in this section except that you
will select STADARD CAB 4 SPEAKER BASE in step 7.
Page 7 of 14
