Pro
Ma r i ne r
™
Table Of Contents
Safety Instructions...
pages 1-2
ProSport Overview...
pages 3-6
Selecting a Charging Profile & Understanding Battery Types
page 7
Installation Guidelines...
pages 7-9
4 Steps to Wire your ProSport Charger Correctly page 10
DC Wiring Diagrams
pages 11-18
Charging Your Batteries...
page 19
Maintenance...
page 20
Trouble Shooting...
page 21
Specifications & Accessories...
page 22
Customer Service & Warranty...
page 23
Introduction
Thank you from all of us at Professional Mariner and congratulations on your recent
purchase of the ProMariner ProSport On-Board Marine Battery Charger.
Powered and designed by ProMariner
™
, a leader in the marine charging industry
for over 30 years; ProSport, the first choice in waterproof on-board marine battery
chargers, has been re-engineered to deliver the latest in multi-stage charging
and industry leading features like our: All new digitally controlled battery type
selector, expanded LED status center and Distributed-On-Demand
™
Charging
Technology for faster charging.
Please save and read this manual carefully and fully understand the safety
instructions before installing your new ProSport Marine Battery Charger.
General Safety Instructions
Before connecting your batteries or applying AC power, read all instructions and cautionary
markings on the battery charger, cables, and batteries.
CAUTION -
To reduce the risk of injury, charge only Lead-acid type rechargeable batteries;
Flooded (Lead-acid), Sealed (Lead-acid), GEL (Gelled Electrolyte Lead-acid) and AGM (Absorbed
Glass Mat). Other types of batteries may burst, causing personal injury.
The ProSport is factory
set for standard Flooded (Lead-acid) /AGM (Absorbed Glass Mat) batteries
.
Use of attachments not recommended or sold by Professional Mariner, LLC may result
in a risk of fire, electrical shock or personal injury.
Do not operate the charger if it has received a sharp blow, direct hit of force, been dropped
or otherwise damaged in any way. Do not install if any protective AC and DC cable
insulation, DC fuse holders and/or ring terminals have been damaged or compromised.
Call ProMariner for repair service to avoid risk of fire, short circuits or electrical shock.
Do not disassemble the battery charger. If service or repair is required please contact customer
care at 1-800-824-0524. Incorrect reassembly or cable modifications may result in a risk of electrical
shock, fire or explosion.
To reduce the risk of electrical shock, remove AC power from the charger prior to any
maintenance or cleaning.
WARNING: RISK OF EXPLOSIVE GASES
WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING NORMAL BATTERY OPERATION. FOR THIS
REASON IT IS OF EXTREME IMPORTANCE THAT EACH TIME BEFORE USING YOUR
CHARGER YOU FOLLOW THESE SAFETY INSTRUCTIONS.
To reduce risk of battery explosion, follow these instructions and those published by the battery manufacturer,
and of any equipment you intend to use in the vicinity of a battery. Review all cautionary markings and labels.
S a f e t y I n s t r u c t i o n s
1
WARNING AVOID SERIOUS INJURY OR DEATH FROM FIRE, EXPLOSION, OR ELECTRICAL SHOCK
- Make your AC power connection in an open atmosphere free of explosive fumes.
- Make your AC power connection in a secure manner that will avoid contact with water.
Personal Safety Precautions
a) Someone should be within the range of your voice or close enough to come to your aid
when working near a Lead-acid battery.
b) Have plenty of soap and water nearby in case battery acid comes in contact with skin,
clothes, or eyes.
c) Wear complete eye protection and clothing protection. Avoid touching eyes while
working near battery(s).
d) If battery acid contacts skin or clothing, wash immediately with soap and water. If acid
enters eye, immediately flood eye with running cold water for at least 10 minutes and get
medical attention immediately.
