Promac 347V, Инструкция по эксплуатации и каталог запасных частей

Страница: 15 / 22

15
Troubleshooting
Fault Probable Cause Suggested Remedy
Bad Cuts (rough)
26. Blade speed is too high for feeding
pressure.
27. Blade is too coarse.
26. Reduce the blade speed and feed
pressure.
27. Replace with finer blade.
Blade is Twisting
28. Blade is binding in the cut.
29. Blade tension too high
28. Decrease feed pressure.
29. Decrease tension on Blade
Unusual Wear on
Side/Back of Blade
30. Blade guides worn
31. Blade guide bearings not adjusted.
32. Blade guide bearing bracket is
loose.
30. Replace blade guides.
31. Adjust blade guide bearings.
32. Tighten blade guide bearing bracket.