Promac 212VLL, Руководство оператора

Страница: 27 / 40

25
SPECIFICATIONS
BENCH DRILL PRESS WITH LASER LINE
MODEL NO.:
MOTOR:
POWER:
SPEED:
SWING:
SPINDLE TAPER:
CHUCK CAPACITY:
QUILL DIAMETER:
STROKE:
CAPACITY:
TABLE TILT:
LASER:
WEIGHT:
212VLL
230V 50Hz
550W
450-2500RPM
12” (305 mm)
MT2
1/8-5/8” (3-16 mm)
2 3/5” (65 mm)
3 1/8” (80 mm)
6” (152 mm) (chuck to column)
19 1/2” (495 mm) (chuck to base)
0 to 45
°
left and right
Class III, transformer powered
77.8 lb (35 kg)
ASSEMBLY AND ADJUSTMENTS
UNPACKING AND CLEANING
Unpack the bench drill press and all its parts, and compare against the list below. Do not discard the carton or any packaging
until the bench drill press is completely assembled.
To protect the bench drill press from moisture, a protective coating has been applied to the machined surfaces. Remove this
coating with a soft cloth moistened with kerosene. Do not use acetone, gasoline, or lacquer thinner to clean. Apply a coat of
paste wax to the table and column. Wipe all parts with a clean, dry cloth.
FIG.2
A
K
D
C
E
F
G
B
H
I
J
L
M
N
O
P
Q R
S
T