-4- DP1300
2/04
International Symbols
Preventative Maintenance Suggestions
The Doughpro DP1300 machines are
relatively maintenance free. For a long
and trouble-free life, the following
preventative maintenance should be
followed:
Daily Care:
1.
Platens
: Turn your machine off
and allow to cool down before
attempting to clean. These
platens should
only
be cleaned
with mild soap and warm water
then wiped off with a clean, soft
cloth or soft sponge.
Never use
steel wool or harsh abrasives or
you will cause costly damage.
2.
All other exterior surfaces
:
Here again a daily wipe down
with mild soap and warm water
will do the job quite nicely.
Never use steel wool or harsh
abrasives or you will cause
costly damage.
Service Problems:
Contact our factory or approved service
agency (800) 624-6717 (U.S. only).
Note: When contacting factory for
information, parts or service
instructions, it is of the
utmost
importance
that the serial number of the
machine be provided. This number can
be found on the serial plate located on
the rear of the machine.
2/10
