Proluxe Apex X1, Руководство по эксплуатации

Страница: 9 / 19

under the lower
platen / Swing Arm
while Press is idle. instruction sheet and need to
order
P/N 110033 for the kit.
Press does not close
when pressing
the two, green, start
buttons 1. Did not simultaneously press the
start buttons exactly at the same
time.
2. The Lower Platen switch mounted
on the base is not in contact to
complete circuit.
1. Try pressing both buttons
exactly at the same time. This is a
anti-tie-down safety feature.
2. Make sure the roller plunger
comes into contact (clicking
noise). This is also a safety feature
that both platens are aligned
before
2
After activation
lower platen and
when the cycle is
complete, the lower
Platen either is very
slow coming down or
doesn’t come down
at all.
The mMufflers on the solenoid valve
are dirty and now allowing air from
passing though. Replace both solenoid valve
mufflers.
Upon activation, the
lower platen is slow
to come up and
down. Filter encased in a black housing in
the back of the machine is
dirty. Replace filter.
8