Proluxe Apex Pro X2 Скачать руководство пользователя страница 5

 

-4- DP

2300

 

 

2/04 

International Symbols 

 
 

 

 

Preventative Maintenance Suggestions 
 

The Doughpro DP

2350

 machines are 

relatively maintenance free.  For a long 
and trouble-free life, the following 
preventative maintenance should be 
followed: 
 
Daily Care: 
 

1.

 

Platens

:  Turn your machine off 

and allow to cool down before 
attempting to clean.  These 
platens should 

only

 be cleaned 

with mild soap and warm water 
then wiped off with a clean, soft 
cloth or soft sponge.  

Never use 

steel wool or harsh abrasives or 
you will cause costly damage.

 

  

 

2.

 

All other exterior surfaces

:  

Here again a daily wipe down 
with mild soap and warm water 
will do the job quite nicely.  

 

Never use steel wool or harsh 
abrasives or you will cause 
costly damage.  

 

 
Service Problems: 
 

Contact our factory or approved service 
agency (800) 624-6717 (U.S. only).  

Note: When contacting factory for 
information, parts or service 
instructions, it is of the 

utmost 

importance

 that the serial number of the 

machine be provided.  This number can 
be found on the serial plate located on 
the rear of the machine. 
 

 

 

2/10

Содержание Apex Pro X2
















Отзывы: