http://prolux.net.ua
3
● You will need a serial data link to run shows using a DMX-512 controller or to run shows on two or
more units set to sync in master/slave operating mode. The combined number of channels required by
all the units on a serial data link determines the number of units the data link can support.
● Units on a serial data link must be daisy chained in one single line. Also , connecting more than 32
units on one serial data link without the use of a DMX optically-isolated splitter may result in
deterioration of the digital DMX signal . The maximum recommended cable-run distance is 500
metes .The maximum recommended number of units on a serial data link is 32.
Cable Connectors
Cables must have a male XLR connector on one end and a female XLR connector on the other end
setting up DMX control
Step 1: connect the male connector of the DMX cable to the female connector (output) on the controller.
Step 2: connect the female connector of the DMX cable to the first unit’s male connector (input).
Note : it doesn’t matter which unit address is the first one connected. We recommend connecting them
in terms of their proximity to the controller, rather than connecting the lowest fixture number first , and
so on.
Step 3: connect others in the chain from output to input as above . Place a DMX terminator on the output
of the final unit to ensure best communication.
DMX Reference ( 2-channle mode)
Channel 1: control volume output
Channel 2: control fan speed
LCD DISPLAY
Button
Function
FUNCTOIN
UP
DOWN
TIMER
VOLUME
MANUAL
Enters the programming mode
Value adjustment upward
Value adjustment downward
Starts the timer controlled operation
Starts or stops all operation
Press and hold for manual haze output
●To navigate the LCD control menu options, use the
FUNCTION
button to scroll through the various
menu options. Then to scroll through a menu options selectable values , use the
UP/DOWN
buttons .
Press
FUNCTION
button to save any changes made and return to navigation the menu.
●
Note
: once a DMX signal is received , manual mode is deactivated and the buttons TIMER, VOLUME
and MANUAL are locked.
Control Panel FUNCTION Structure
Interval
10-200(seconds)
Pause time between timed output
Duration
10-200(seconds)
Duration time of timed operation
Ready
Haz
e
FUNCTION
N
UP
DOWN
TIMER
VOLUME
MANUAL
3
4
