Prolux proshine, Руководство по эксплуатации

Страница: 11 / 14

- 11 -
n USING THE CLEANING ATTACHMENTS
To remove the cleaning pads/cloths from the buffer unit, simply peel the pad away from the Velcro
surface of the buffer. To attach the pads/cloths, take the pad and press the Velcro side of the pad
onto the Velcro surface of the buffer and apply firm pressure to ensure the Velcro surfaces are
completely meshed together.
NOTE: The Scouring pad, Microfiber cloth, and Sponge will need to be attached to the
extra Velcro lined brush head in order to be used. (Fig6)
n USING YOUR PROLUX ProShine FLOOR BUFFER
Once you have the unit assembled, the correct pads installed, and the battery charged; you are now ready to
use your Prolux buffer.
1. Firmly press the power button to turn the cleaner on. (See page 6)
2. Spray water or any cleaning solution on the surface you are cleaning.
3. Once the desired area is properly saturated with water/solution, you will then run the unit over that area in a
smooth slow back and forth motion or left to right, until the area is clean.