Prology MCE-525UR, Руководство по обслуживанию

Страница: 6 / 37

1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully
Cut the connector, connect the colored leads of the power cord to the car battery,
before connecting, incorrect connection may
cause serious damage to this unit.
as shown in the colour code table below for
speaker and power cable connections
Using the ISO Connector
Wiring Diagram
Connector Connector
Battery 12V (+)/yellow
Auto Antenna/blue
ACC+/red
Ground/black
Rear Right(+)---Purple
Rear Right(-)---Purple/Black Stripe
Front Right(+)---Gray
Front Right(-)---Gray/Black Stripe
Front Left(+)---White
Front Left((-)---White/Black Stripe
Rear Left(+)---Green
Rear Left(-)---Green/Black Stripe
Fuse 15A
Aux-in
L ( White )
R ( Red )
Connector
Rear Line-out (Gray)
R(Red)
L(White)
Antenna
AUDIO OUT
Amplifier
Pink
Ground Lead
Ignition key
+12V DC When ON/ACC
Left Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Front)
White/
Black
Stripe
White
Gray/
Black
Stripe
Green/
Black
Stripe
Gray Green
Purple/
Black
Stripe
Purple
Black
To car b)
Cont12V DC
Yellow
Red
Blue
Motor/Electric Antenna relay control Lead
Amplifier relay control Lead
ISO Connector
Black
R(Red)
L(White)
Front Line-out (Brown)
Right Speaker
( ) Rear
Original wirin g
Modified wiring
Red
Yellow Yellow
Red
Red
Yellow Yellow
Red
For some VW/Audi or Op el(Vauxhall)
car models, you may ne ed to modify
wiring of the supplied po wer co rd as
illu strated , or else the m emory of the
unit may b e lost after you power off.
Co ntact your authorized car de aler
before installing this unit.
Telephone Mute (active low logic level)(optional)
Subwoofer out
(Green) Amplifier
Amplifier
Telephone-mute/pink