
11
English
Displaying max and min temperatures
1. Press [ MEM/inHg-hPa ] to display max indoor and outdoor temperatures.
2. Press [ MEM/inHg-hPa ] to display min indoor and outdoor temperatures.
Resetting max and min temperatures
Hold in [ MEM/inHg-hPa ] during max or min temperature display in order to
reset them to zero.
Backup batteries
• The backup batteries will retain time and alarm settings during a power cut
but the alarm will
not
sound.
• The display will also be turned off when only supported by the backup
batteries. Press [ Zz
] to turn on the 5 sec. backlight.
1. Open the battery cover at the back of the weather station by sliding it in
the direction of the arrow.
2. Insert 3 × AAA/LR03 batteries.
3. Refit the battery cover.
Note:
Note the polarity markings in the battery compartment to ensure
correct insertion.
Connecting 2 additional outdoor sensors
1. Press [
▲
CHANNEL ] until channel 2 appears in the display.
2. Hold in [
▲
CHANNEL ] until
flashes,
The weather station will then begin
scanning for a signal from the outdoor sensor set to channel 2.
3. Open the battery compartment on the outdoor sensor and make sure that
the channel selector (28) is set to channel 2.
4. Insert 2 × AAA/LR03 batteries into the battery compartment.
Note the polarity markings in the battery compartment to ensure correct
insertion.
5. Refit the battery cover.
6. The temperature and humidity data from this sensor will appear on
the display after a few seconds.
7. To connect a 3rd outdoor sensor press [
▲
CHANNEL ] until channel 3
appears. Then follow the same procedures as listed above for connecting
a sensor using channel 2.
Содержание IW006-DCF
Страница 63: ......