4
English
Clock
Setting the time
1. Hold down [SET] for a few seconds until the hours display begins to flash.
2. Set the hours using [
▼
] and [
▲
] (keep the selected button pressed to advance
more quickly). Confirm with [SET].
3. The minutes display will start to flash. Set the minutes with [
▼
] and [
▲
] and
confirm with [SET].
4. “D” (date) and “M” (month) will begin to flash. Select whether you wish to display
the month or date first.
5. The language setting will start flashing. Select the desired language using
[
▼
] and [
▲
] and confirm with [SET]: EN (English)
→
GE (German)
→
IT (Italian)
→
FR (French)
→
NE (Dutch)
→
ES (Spanish)
→
DA (Danish)
→
EN, etc.
6. The “YR” (year) setting will begin to flash. Use [
▼
] and [
▲
] to select and
confirm with [SET].
7. The “M” (month) setting will begin to flash. Use [
▼
] and [
▲
] to select and
confirm with [SET].
8. The “D” (date) setting will begin to flash. Use [
▼
] and [
▲
] to select and
confirm with [SET].
9. The “24 H” (24-hour clock) will begin to flash. Select between a 24 or 12 hour time
display using [
▼
] and [
▲
] and confirm with [SET].
Time and alarm display
Press [MODE] to switch between the time and alarm “AL” display.
Time projection and brightness setting
When the clock is running on the batteries
Note:
When the clock is powered by the batteries the display and projection are
automatically shut off to save battery power. They only come on when [ SNOOZE/LIGHT ]
is pressed.
Press [SNOOZE/LIGHT] once to light the display, weather icon and projection of time
for 20 seconds.
When the clock is connected to the mains via the mains adaptor
Note:
When the clock is powered by the mains adaptor the time projection is
on continuously.
By pressing [SNOOZE/LIGHT] you can select one of the following 3 modes:
-
Display, weather icon (bright light) and time projection.
-
Display, weather icon (dim light) and time projection.
-
Time projection only.
Focus using the focus ring on the projector.
