Page 15
Device
: DeltaScan Monitor
Doc. Type : Instructions for Use
(English)
System Ver : R2
Date
: 2019-12-12
: 006.201.D
Copyright: Prolira
Step 5
•
Face the patient. Hold point 2 of the
DeltaScan Patch between thumb and
index finger, and remove the liner,
as indicated in Figure 15.
•
Position the Reference electrode
(the vertical green stripe next to nr 2) at the
center of the forehead above the nose, and
one finger above the eyebrow.
The triangle shape of the DeltaScan Patch
(under the green stripe) points towards the
nose. The other electrode (green stripe)
automatically is at the right position too, above
the eyebrow. See Figure 16.
Step 6
Press the 3 electrodes (the 3 green stripes)
and the green logo firmly to the patient’s skin for
five seconds.
Please note!
for the proper reception of EEG
signals (which are microvolts of brain activity) it
is very important that the electrodes have good
contact with the skin. Therefore, the electrodes
must be pressed and well attached to the skin,
before the start of a measurement.
During a measurement the electrodes may not
be touched (not even a pillow or headrest may
push against or touch the electrodes).
Figure 15: Remove the liner while holding
point 2 of the DeltaScan Patch.
Figure 16: Position the electrodes above the
nose and eyebrow.