ProLinx 6201-WA-ASCII, Руководство по установке

Страница: 24 / 50

6201-WA-ASCII ♦ ProLinx Wireless Configure the DFNT Module
High Speed Wireless ASCII Generic Serial Gateway
Page 24 of 50 ProSoft Technology, Inc.
September 6, 2007
4.1 Complete the ProSoft Configuration Builder Sections
4.1.1 Radio Ethernet Configuration
Double click on the selection.
Every EtherNet/IP module is set up with the defaults shown in the example. You
may have to modify values such as the Radio Default Gateway, the Network
Name (SSID), and the Station Name to suit the needs of your network. The
Station Name may be modified when using more than one EtherNet/IP module.
Note:
All modules must have the same Subnet Mask, Default Gateway, and Network
Name (SSID) if they are all located on the same network. Only the fourth octet in the
Radio_IP address must be different for each module. Please refer to
Default Module
Configuration Assignments
for a list of pre-assigned ProSoft product IP addresses.
The PWP Driver Manual located on the ProLinx Solutions CD contains a
description of the remaining parameters. If you are making changes, be sure to
save your changes before moving on to the next step.