Overview
2
EN2
LED
Number
Description
LED
Power
2.4G/5G
1
2
WPS
3
LAN 1-4
4
WAN
5
ON - Device is powered on
OFF - Device is powered off
ON - Wireless link established and active
OFF - Wireless is turned off
Blink - Wireless packet being transmitted
OFF - Idle
Blink - WPS is being triggered
ON - LAN link established and active
OFF - No LAN Link
Blink - LAN ethernet packet being transmitted
ON - WAN link established and active
OFF - No WAN Link
Blink - WAN ethernet packet being transmitted
Number
Description
Ports/Buttons
WAN
6
LAN 1-4
7
The WAN port is to connect to the broadband access
device. Usually connect to DSL / Cable modem, or to
network switch at home/ office
The LAN ports to connect local PC/Laptop to the router
Power
8
Power socket to connect the power adapter
Power Button
9
Power ON / OFF SWITCH
WPS
10
Press this button for at least 3 full seconds and the
WPS LED will start blinking to start WPS
Reset
11
Press this button for at least 10 seconds to Reset
device to its default settings
Ports/Buttons
Note:
The illustrations in this document may appear different from your model.
E
nglish
