PROLiNK PA30-40, Руководство по эксплуатации

Страница: 10 / 14

O P E R AT I O N I L L U S T R AT I O N
10
5.6 The Operation Instruction of Built-in MP3
Note:
1. The user needs to push the button with a proper strength to avoid destroying the button.
2. Operate the remote control in a possibly short range since when obstacles exist, the remote
control can not work in a long distance.
3. If the button is loose or fail to work, please change the remote control or battery. If the problems
occur again, please contact the supplier.
4. The SD card or USB interface must be inserted in the right way to avoid the damage to the SD
card or USB interface.
USB
SD
SD/MEDIA
MODE
The USB interface and SD card take the priority of others.
①
"MODE" button: there are 3 modes for choice: radio, blue tooth, audio.
②
" " button: short press to select the previous track, long press to reduce the volume.
③
" " button: in the audio status, press the first time to pause, the second time to continue.
④
" " button: short press to select the next track, long press to increase the volume.
5.7 Mobile phone Bluetooth connection method
5.8 MP3 module recording function Description
①
②
③
,
④
.
Insert SD card into the corresponding interface of MP3 module.
Long press the “PLAY/PAUSE” button on the MP3 module for 3 seconds to enter the
recording mode.
After recording ends press “MODE” button to save and start to play the recording file.
User can press the last song and the next song button to play the required recording file
1) Press the “MODE button on the MP3 player to set the module to Bluetooth mode. The LCD will
display “bt” on screen, and while in Bluetooth mode, this mark will always be present. As soon as
you enter “bt” mode the device is ready to pair and sync with another Bluetooth device in the
vicinity.
2) Activate Bluetooth on your mobile device (phone or tablet or laptop). Check the mobile device
for any newly scanned devices. The Bluetooth label for the NA-40B/NA-60B is “PA-02086”.
3) If that device shows up on your mobile devices list, then select it and begin the pairing process.
4) Once the new ‘bt’ playback device is connected, you can commence playing songs and audio
podcasts from your phone through the amplifier module.
5) Transport controls on the MP3 player are in sync with the phone. Press “Play/Pause” on the
module and the mobile device will play or pause. Press “Next” or “Previous” and the current track
will restart. You can also change the audio playlist from the phone, as well as pause, skip etc.
”