PROLiNK Hurricane 9000G Скачать руководство пользователя | Manualshive

Страница: 59 / 62

background image

Chapter 3 Configuration

55

This test sends ATM OAM F5 Segment loop back request cells to the central office equipments through
your DSL connection. This test will pass if response cell is received. Since your service provider might not
support this test, your DSL modem could still work even if this test fails.

If this test fails consistently and your DSL modem seems not working, check to make sure the VPI and
VCI are configured correctly.

This test returns FAIL if the DSL synchronization test failed.

Test ATM OAM End-to-End Loop Back

This test sends ATM OAM F5 End-to-End loop back request cells to the central office equipments
through your DSL connection. This test returns PASS if response cell is received. Since your service
provider might not support this test, your DSL modem could still work even if this test fails.

If this test return FAIL consistently and your DSL modem seems not working, check to make sure the VPI
and VCI are configured correctly.

This test returns SKIPPED if the DSL synchronization test failed.

Test Ethernet connect to ATM

This test returns PASS if the ATM AAL5 module is loaded correctly in your DSL modem. If this test
returns FAIL, an internal error has occurred.

This test returns SKIPPED if the DSL synchronization does not return PASS.

Test IP connect to PPP

This test returns PASS if your DSL modem has been assigned a valid IP address by your service
provider through DHCP or your DSL modem is assigned a valid IP address statically.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns
FAIL consistently and DHCP client is turned on in your DSL modem, check with your service provider. If
this test returns FAIL consistently and your DSL modem is statically assigned an IP address, make sure
the IP address is the correct one assigned by your service provider.

This test returns SKIPPED if “Ethernet connect to AAL5” test does not return PASS.

Test Internet connection

This test returns PASS if the gateway can be reached through ping request. The gateway is assigned by
your service provider, or obtained from your service provider by PPP negotiation or DHCP negotiation.

If this test returns FAIL, run this test again a few minutes after this test is completed. If this test returns
FAIL consistently and your DSL modem seems not working, check to make sure your statically assigned
IP address is configured correctly or DHCP client is turned on with the current VC.

This test returns SKIPPED if "IP connect to PPP" or "IP connect to Ethernet" test does not return PASS.

«
...
57
58
59
60
61
...
»

Содержание Hurricane 9000G































































Отзывы:

Нет отзывов

Похожие инструкции для Hurricane 9000G

Univerge SV8100

Бренд: NEC Страницы: 44

INTERNET PRIVACY PROTECTION

Бренд: AlphaShield Страницы: 49

Бренд: Aztech Страницы: 2

4-Port 10/100Mbps Ethernet Broadband Router

Бренд: AOpen Страницы: 41

Бренд: TP-Link Страницы: 176

Бренд: Cowfish Technologies Страницы: 38

Бренд: NBase Страницы: 18

Бренд: Gearlinx Страницы: 23

Бренд: Tripp Lite Страницы: 2

Бренд: Tripp Lite Страницы: 2

OmniStor 4900F Series

Бренд: Rackable Systems Страницы: 196

DotSurfer GPC-2100

Бренд: Gtran Wireless Страницы: 44

Бренд: Allied Telesis Страницы: 44

Бренд: H3C Страницы: 148

Бренд: Quamtum Страницы: 42

Бренд: Tripp Lite Страницы: 2

Бренд: Trane Страницы: 8

Бренд: Datacom Страницы: 118

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды