6
the source device first, and make sure the setting can be supported by the
sink devices. For example, if user set the source to send out a DTS 5.1CH
(or Dolby 5.1CH) signal, but the sink device can only support up to 2 CH, you
will not have sound output form the sink device.
If source devices support the function of Auto Detection &
Auto Adjustment
, the source device will auto adjust the output audio
signal to the optimal standard based on the following different modes. Users
can also set the audio output signal by themselves. Please make sure the
setting can be supported by the sink devices.
HA-110SA Mode Operation
Mode Mode
Action
Mode A
Follow TV’s Audio
Signals
※
Factory Setting Mode
In this Mode, output audio signal will follow
the audio format from TV. For example, if
TV’s audio format can only support PCM
2CH, the output audio format of HA-110SA
will be PCM 2CH as well.
Mode B
Audio Specified
(Dolby Digital 5.1, DTS
5.1, and PCM 2CH)
Set the output audio signal as one of the
following audio formats: Dolby Digital 5.1,
DTS 5.1, PCM 2CH or AAC.
For example, if the connected source device
supports AAC audio format output, the
output audio format of the main unit will be
AAC as well.
NOTE:
For audio output format adjustment:
(Please refer to the source
device manual.)
1.
Check the supported audio format of the feature film. (Stereo,
DTS
®
5.1, and Dolby
®
Digital 5.1...etc)
2.
Set the audio output format of source device. Ex.
uncompressed PCM or Bit Stream (Dolby
®
Digital 5.1, DTS
®
5.1 ...etc.)
3.
Select the output of audio format and language from the main
