15
Open the appliance as briefly as possible.
Ensure that the doors are always closed properly.
OPERATING NOISES
Normal noises
Motors are running.
Refrigerant is flowing through the tubing.
CLEANING AND MAINTENANCE
Do not use abrasive cleaning agents or solvents.
1. Set the temperature control knob to the 0 position and disconnect the mains plug from the mains
socket.
2. Take out the food and store in a cool location.
3. Clean the appliance with a soft cloth, warm water and detergent.
4. Wipe the door seal with clear water only and then wipe dry thoroughly.
5. After cleaning, reconnect and adjust the temperature control knob as desired.
6. Put the food back into the appliance.
The LED light in the fridge compartment cannot be replaced by the user. If the LED light stops working,
please contact the local authorised service agent.
TROUBLESHOOTING
If there is a problem with your appliance, please check the following points before contacting customer
service.
Problem
Possible causes
Possible solution
Appliance does
not operate.
No electricity at power outlet.
Check that the plug is correctly connected
and power switched on.
Appliance is
noisy.
Cabinet not stable or level.
See installation section.
Appliance not
cool
Temperature setting not correct.
Frequent door openings.
Large amount of food recently
added.
See temperature control section.
Minimise door openings to allow
temperatures to stabilise.
Downloaded from www.vandenborre.be
