Proline PCH465K-U Скачать руководство пользователя страница 9

CLEANING THE CERAMIC HOB

Before you begin cleaning make sure that the hob is switched off.

• Remove spillages and other types of incrustations.

• Dust or food particles can be removed with a damp cloth.

• If you use a detergent, please make sure that it is not abrasive or scouring. Abrasive

or scouring powders can damage the glass surface of the hob.

• All traces of the cleaner must be removed with a damp cloth.

• Dust, fat and liquids from food that has boiled over must be removed as soon as pos-

sible.

• If they are allowed to harden they become increasingly difficult to remove.

This is especially true in the case of sugar/syrup mixtures which could perma-

nently pit the surface of the hob if left to burn on it.

• If  any  of  these  products  has  melted  on  the  ceramic  surface,  you  should  remove  it

immediately (when the surface is still hot) by using a scraper to avoid any permanent
damage to the surface of the hob (available under part no. 103138).

• Do  not  put  articles  on  the  hob  which  can  melt:  i.e  plastic,  aluminium  foil,  sugar,  sugar

syrup mixtures etc.

• Avoid using a knife or other sharp utensil as these may damage the ceramic surface.

• Do not use steel wool or an abrasive sponge which could scratch the surface perma-

nently.

Fig.3.1

CONTROL KEYS

• care should be taken not to damage 

the control keys.

Do  not  use  a  steam  cleaner

because the moisture can get into

the appliance thus make it unsafe.

9

Содержание PCH465K-U











Отзывы: