Proline DWM12P, Инструкция по эксплуатации

Страница: 6 / 15

6
Always use salt intended for use with dishwashers.
The salt container is located beneath the lower rack and should be filled as follows:
Remove the lower basket and then unscrew and remove the cap from the salt
container.
If you are filling the container for the first time ,fill 2/3 of its volume with
.
1Ltr
of water
Place the end of the funnel(supplied) into the hole and introduce about 2kg of
salt .It is normal for a small amount of water to come out of the salt container
1
2
4
3
Unscrew the cap from the salt container.
There is a ring on the container with an arrow on it (see Figure to the side), if
necessary, rotate the ring in the anticlockwise direction from the "-" Setting
toward the "+" sign, based on the hardness of the water being used.It is
recommended that adjustments should be made in accordance with the following
table:
1
2
1.
2.
I
After adding salt, the salt warning indicator light may not immediately go out, it may take a number of cycles
for the salt to circulates through the system.This is not a fault and will not affect the correct operation of your
dishwasher.
f salt is spilt into the dishwasher tub select the soak program to rinse this excess salt away.
* Hardness expressed as a sum of calcium / magnesium concentrations
Contact your local water board for information on the hardness of your water supply.
The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes
and utensils.
The appliances is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the
water.
There are two ways to reduce the hardness: one way is using water softener, the other is using
detergent.
water