Push forward the switch on the tube then
adjust. Release the switch until the
desired length is achieved.
3. Attach the desired cleaning accessory to the end of the tube.
To remove the tubes and accessory, hold each piece tightly and pull firmly apart.
OPERATION
1. Pull the power cord out of the appliance and insert the mains plug into the mains
socket.
A YELLOW mark on the power cord indicates the ideal cable
length. Do not extend the power cord beyond the RED
mark.
2. Press the power button on top of the appliance to switch on
the appliance.
Adjust the suction power by turning the variable suction
power knob.
3. You can quickly reduce the suction power by pushing the air flow regulator on the
hose handle. Push it forward, suction power will increase; push it
backward, suction power will reduce.
Using the Cleaning Accessories
Dual position carpet / floor brush (Drawings for reference only)
Position 1: Bristles extended
-
For hard floors
Position 2: Bristles retracted
-
For carpets
EG-
5
Downloaded from www.vandenborre.be
