ProLights VX3000D, Руководство пользователя

Страница: 22 / 32

8
VX3000D
1
2
3
4
2.3 Wireless remote control
VX3000D is equipped with a multi-channel wireless control system, employing a wired receiver and a 4-key
wireless remote control. Connect the KT-1 receiver to the control panel output, and then turn on the ma-
chine. The red LED located on the KT-1 receiver will light up indicating that the machine is in preheating.
When the preheating process is finished and the machine is ready, the LED will light up to green. Now you
can control the machine through the wireless remote control. The timer controller KT-1 is equipped with 4
dipswitches, located on the side, which are in numerical order (1-4), corresponding to wireless remote con-
trol keys. The LED on the wireless remote control will light up when you will press any button.
More Vortex machines can be controlled with a single remote control. Each of the keys (1-4) of the remote
control will activate the machines having the same values (1-4) enabled on KT-1 receiver (dipswitch ON
position, downward). To control more machines at the same time using a single key of the remote, just set
them on same channel (1-4).
15 14
16
17
18
19
20
KT-1 RECEIVER WIRELESS REMOTE CONTROL
Switch number
Fig.3
Fig.4
14. GREEN LED;
15. RED LED (on KT-1 receiver);
16. DIP-switch [1-4];
17. ANTENNA;
18. BUTTONS [1-4];
19. RED LED (on wireless remote
control);
20. COVER.
KT-1
WIRELESS CONT
R
OLLER
1 2 3 4