ProLights NANOLASERFXRB, Руководство пользователя

Страница: 25 / 32

11
NANOLASER series
- 4 - MAINTENANCE
4.1 MAINTENANCE AND CLEANING THE UNIT
Dust build up reduces light output performance and can cause overheating. This can lead to reduction of
the light source’s life and mechanical wear. To maintain optimum performance and minimize wear, you
should clean your lighting products at least twice a month. However, be aware that usage and environ-
mental conditions could be contributing factors to increase the cleaning frequency.
To clean this lighting product, follow the instructions below:
• Unplug the product from power.
• Wait until the product is cold.
• Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface
and fan vents.
• Clean the glass panel (laser aperture) with a mild solution of glass cleaner or isopropyl alcohol.
• Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue, and drag any dirt or
grime to the outside of the glass.
• Gently polish the glass surface until it is free of haze and lint.
BUTTON DESCRIPTION
NOTE
ON/OFF To turn ON or OFF the fixture
MUSIC SHOW
Sound Activated
The LED is blue. Number 1 - 9 is for sound sensitivity
setting.
"1" is the least sensitive
"9" is the most sensitive
Sound Strobing
AUTO SHOW
Auto Emotion
The LED is red.
Auto Smooth
COLOR CHANGING
Cycle through programmed color, Red&Green, Green, Red (for Auto Emotion, Auto Smooth e
Sound Activated only).
MANUAL MODE
A= Red strobing
"1 - 8" is strobing from fast to slow
"0" is Off
"9" is On
B= Green strobing
C= Effect Speed
"1 - 9" is speed from slow to fast
"0" is not moving
NOTE - Press the button for
R
otate effect direction