ProLights Mobiblast, Руководство пользователя

Страница: 35 / 44

13
MobIbLAST
• Press the UP/DOWN button and select [
Transmit Manual].
• Press the ENTER button to confirm.
• Press the UP/DOWN button, select one of the transmitting signal [CH01 - CH16].
• Press the ENTER button for save the setting.
For the manual receive mode:
• Press the MENU button so many times until the display shows [ Wireless Setting] .
• Press the ENTER button to confirm.
• Press the UP/DOWN button and select [Receive Manual].
• Press the ENTER button to confirm.
• Press the UP/DOWN button, select one of the transmitting signal
[CH01 - CH16].
• Press the ENTER button for save the setting.
3.15 WHITE BALANCE
To set the white balance refer to the following steps:
• Press the MENU button so many times until the display shows [ White Balance].
• Press the ENTER button to confirm.
• Press the UP/DOWN button to select the program [R = 255 - B = 255].
• Confermareper Press ENTER to confirm.
• Press the UP/DOWN buttons to set the value
[0 - 255].
• Press the ENTER button for save the setting.
3.16 DIMMER
• Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times until
shows [ dIM] , and press the button ENTER to confirm.
• Press the button UP/DOWN to select [ OFF - dIM1 - dIM2 - dIM3].
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3.17 LINKING
1. Connect the DMX OUT of the master unit via 3-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
3.18 DMX MODE
• Press the button MENU so many times until shows, CH4 - CH9 - CH16 and press the button ENTER to con-
firm.
• Press the button UP/DOWN to select the desired DMX address [d001 - d512] . Press and hold to scroll
quickly. Press ENTER button to store.
The tables on page 16 indicate the operating mode and DMX value. The MOBIBLAST is equipped with 3
pole XLR connections.
3.19 DMX ADDRESSING
To able to operate the MOBIBLAST with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-