ProLights LUMIPAR18TRI, Руководство пользователя

Страница: 27 / 36

9
LUMIPAR18TRI
• Press MENU button to select Auto Program
[P--]
.
• Press ENTER button.
• Using UP/DOWN button, select one of the five programs.
• Press ENTER button to confirm.
• Press MENU until [S000 - S100] appears on the LED screen.
• Press ENTER button.
• Using UP/DOWN button, select the desired run speed (slow~fast)
• Press the button ENTER to save the setting.
3.5 STATIC COLOR
This fixture has preprogrammed, static looks that may be triggered without a controller. Access these
chases via the control panel on the back of the fixture.
• Remove any DMX controller from the fixture.
• Press MENU button to select Static Color mode [C--] .
• Press ENTER.
• Using UP/DOWN button, select one of the seven presets.
• Press ENTER button to confirm.
3.6 CUSTOM STATIC COLOR
This fixture has the ability to accept custom static color settings. Access this via the control panel.
• Press MENU button until [U--] appears on the LED screen.
• Press ENTER button.
• Using UP/DOWN button, select the desired color.
• Press ENTER button.
• Using UP/DOWN button, select the desired color value [001 - 100] . By selecting 000 , the color will remain off.
• Press ENTER button to continue to the next color (R, G, b) .
• Using UP/DOWN button, select the desired color value [001 - 100] .
• Continue until the desired mix is obtained. The order of colors is red, green, and blue.
• Press ENTER button to continue to the strobe setting.
• Using UP/DOWN button, select the desired strobe value [001 - 100] . By selecting 000 , the strobe function
will remain off.
• Press ENTER button to save the final color setting. This will move the selection to the following color.
However, this is necessary to save the modification.
3.7 MASTER/SLAVE MODE
This mode allows a single unit, the master, to operate in one of the standalone modes, while one or more
fixtures, slaves, synchronize their responses to the master.
MASTER SETTINGS
• Connect the fixtures with DMX cables.
• Use any one of the standalone modes for the master unit.
SLAVE SETTINGS
• Set the slave fixture(s) to DMX mode at starting address 001.
3.8 LINKING
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.