ProLights LUMIPAR12IRTRI, Руководство пользователя

Страница: 27 / 36

9
LUMIPAR12IRTRI
3.5 SOUND ACTIVE
• Press the button MENU so many times until the display shows [P--] , then press the button ENTER.
• Press the button UP/DOWN to select the desired program [P--5 - P--6] . Press the button ENTER to confirm.
• Use the microphone sensitivity adjustment knob (8) to adjust the fixture to react to the beat of the
music.
3.6 PRESET COLORS
• Press the button MENU so many times until the display shows [C--] , then press the button ENTER.
• Press the button UP/DOWN to select the desired color preset. Press the button ENTER to confirm set-
ting.
- C1 Red
- C2 Green
- C3 Blue
- C4 Cyan
-
C5
Magenta
- C6 Yellow
- C7 White
3.7 CUSTOM STATIC COLOR MIXING
• Press the button MENU so many times until the display shows [U--] , then press the button ENTER.
• Press the button UP/DOWN to select the desired color value [000 - 100] . Press the button ENTER to con-
tinue to the next color.
• Press the button UP/DOWN to select the desired color value [000 - 100] .
• Continue until the desired mix is obtained.
• Press the button ENTER to save the final color setting.
3.8 MASTER/SLAVE MODE
This mode will allow you to link up the units together without a controller. Choose a unit to function as the
Master. The unit must be the first unit in line; other units will work as slave.
MASTER SETTINGS
• Connect the fixtures with DMX cables
• Use any one of the standalone modes for the master unit.
SLAVE SETTINGS
• Press the button [MENU] so many times until the display shows [3CH] or [7CH] , then press the button
ENTER.
• Press the button UP/DOWN to set DMX address to [d001 - d512] .