User Manual
PINSPOT »
LEDPINSPOT
WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future
reference. It contains important information about the installation, usage and maintenance of the unit.
In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual
at any time and without prior notice. All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it
For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - [email protected]
Rev001 - 08/12 ©2012 Music & Lights S.r.l. - Italy - www.musiclights.it
EN
General instruction
• The products referred to in this manual conform to the European Community Directives and are therefore marked with . • Make certain that no
inflammable liquids, water or metal objects enter the fixture. • Do not dismantle or modify the fixture. • All work must always be carried out by qualified
technical personnel. Contact the nearest sales point for an inspection or contact the manufacturer directly. • If the unit is to be put out of operation
definitively, take it to a local recycling plant for a disposal which is not harmful to the environment.
Warnings and installation precautions
• If this device will be operated in any way different to the one described in this manual, it may suffer damages and the guarantee becomes void. Fur
-
thermore, any other operation may lead to dangers like short circuit, burns, electric shock, etc. • Before starting any maintenance work or cleaning the
projector, cut off power from the main supply. • For cleaning only use a dry, soft cloth, by no means chemicals or water. • Keep any inflammable material
at a safe distance from the fixture • Never connect the device to a dimmer pack • Never look directly at the light beam • Always additionally secure the
projector with the safety rope.
Fig.1
Fig.2
1
3
LENS
COLOR GEL
RETAINER RING
2
Description and technical specifications
LED Pinspot with 3W White source, performing a 6° beam angle for applications as mirrorball
pointer or truss lighter. The compact size and the low electric absorption allow to LEDPINS
-
POT to be employed everywhere.
• Light source: 1x3W White LED
• Effect type: LED pinspot for mirrorball and truss
• LEDs average life span: >50’000 hours
• Beam Angle: 6°
• 9° optics kit included
• Dimensions: 190x100x140mm
• Power supply: AC 100/240V, 50/60Hz
• Power consumption: 4W
• Weight: 0,4 kg
Elements
1.
MOUNTING BRACKET
2.
LOCKING KNOB
3. POWER CABLE
Mounting
LEDPINSPOT may be set up on a solid and even surface. The unit can also be mounted upside
down to a cross arm. For fixing, stable mounting clips are required. The mounting place must
be of sufficient stability and be able to support a weight of 10 times of the unit’s weight.
When carrying out any installation, always comply scrupulously with all the regulations (par
-
ticularly regarding safety) currently in force in the country in which the fixture’s being used.
• Install the projector at a suitable location by means of the mounting bracket (1).
• Always additionally secure the projector with the safety rope from falling down. For this
purpose, fasten the safety rope at a suitable position so that the maximum fall of the pro
-
jector will be 20 cm
• Adjust the projector and use the knob (2) to slightly release or tighten the locking mecha
-
nism of the bracket if is necessary.
Lens replacement
The lens of LEDPINSPOT can be replaced to change the projection angle of the luminous
beam (fig. 2):
• Remove the retainer
• Remove the lens (the lens will fall out without the retainer ring installed
• Insert the new lens.
• If installing a color gel, place this between the retainer ring and the lens
• Install the retainer ring.
• Assure that the installation is tight
