ProLights EclProfile FW, Руководство пользователя

Страница: 19 / 32

Error showed on screen Possible causes
[LED TEMPERATURE ERROR] This error message indicates that an overheating on the LEDs
has occurred and the lamp has been switched OFF by the
product protection system.
[LED TEMPERATURE SENSOR
ERROR]
LED sensor damaged (open or in short circuit).
Keys Mode Description
ENTER + MENU after power on Flip Display Directly flip display without enter inside menu.
UP + ENTER then power on Bootloader Force firmware upgrade.
12 - ERROR MESSAGES
11 - SHORTCUTS
LAMP_STATE 0x0403 x x
LAMP_ON_MODE 0x0404 x x
DEVICE_POWER_CYCLES 0x0405 x x
Display
Settings
DISPLAY_INVERT 0x0500 x x
DISPLAY_LEVEL 0x0501 x x
Configuration LOCK_PIN 0x0640 x x
LOCK_STATE 0x0641 x x
LOCK_STATE_DESCRIPTION 0x0642 x
Control IDENTIFY_DEVICE 0x1000 x x
RESET_DEVICE 0x1001 x
POWER_STATE 0x1010 x x
PERFORM_SELFTEST 0x1020 x x
SELF_TEST_DESCRIPTION 0x1021 x
CAPTURE_PRESET 0x1030 x x
PRESET_PLAYBACK 0x1031 x x
IDENTIFY_MODE 0x1040 x x
PRESET_INFO 0x1041 x
PRESET_STATUS 0x1042 x x
POWER_ON_SELF_TEST 0x1044 x x
Custom PIDs FAN SETTINGS 0x8000 x x
0 = auto
1 = silent
2 = off
3 = full
PROLIGHTS - Ecl
FW 17