MENU
1
CONNECT
Address
DMX
WDMX
ArtNet
sACN
1 - 512
DMX Mode Refer to DMX Chart chapter
Wireless
WDMX
ON/OFF
On-
Off
Enable/Disable the wireless card.
WDMX
mode
Transmitter
Receiver
Choose whether to set the wireless card as Transmitter
or Receiver.
WDMX mode is unlocked only if WDMX ON / OFF
is ON.
TX link
On-
Off
TX link unlock when the unit is set as a transmitter.
TX unlink
On-
Off
Disconnect the transmitter from all receivers.
TX unlink unlocks only if WDMX mode is on
transmitter.
RX reset
On-
Off
Total reset of the receiver.
RX reset unlocks only if WDMX mode is receiver.
IN to WDMX
(TX)
On
-Off
Enable/Disable the transmission of the dmx from the
transmitter to the receiver via wdmx.
WDMX to
DMX (RX)
On
-Off
Enable/Disable the retransmission of the DMX from
the receiver to the other units connected by cable to
the receiver itself.
Ethernet
Settings
ArtNet
settings
IP Address
Settings for ArtNet protocol use.
Net
Subnet
Universe
sACN
settings
IP Address
Settings for sACN protocol use.
Universe
Merge
Mode
Off
HTP
LTP
Ethernet to
WDMX
On
-Off
Enable / Disable DMX retrasmission from sACN/
ArtNet signal to WDMX (TX mode).
Ethernet to
DMX
On
-Off
Enable / Disable DMX retrasmission from sACN/
ArtNet signal to DMX out port.
2
SETUP
Light
Control
Dimmer
Speed
Auto
Fast
Medium
Slow
Off
Set Dimmer Speed.
This parameter defines interpolation of DMX
Changes for main functions.
Off turns off interpolation
Dimmer
Curve
Linear
S-Curve
Square Law
Inverse Square Law
High Res@Low
Choose dimmer curve.
Dimmer End
Snap Off @ End
Fade Off @ End
Set Dimmer End behaviour.
Snap Off will make fixture snap when dimming out
to 0.
Fade Off will make fixture fade when dimming out to 0.
This selection affects only 004-000 DMX value
behaviour.
15
PROLIGHTS - EclPanel
TWCXL
9 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in
BOLD
indicate the
default settings. Functionalities with the "(WIP)" description are still under development.