9
ECLIPSEJZIP
. . . . . . . . . . . .
DMX512 Controller
DMX Address: 33
DMX Address: 42
DMX Address: 36
DMX Address: 39
Fig.5 - Example 3 DMX channels configuration
Number of
DMX channels
Start address
(example)
DMX Address
occupied
Next possible start
address for unit No. 1
Next possible start
address for unit No. 2
Next possible start
address for unit No. 3
1
33
33
34
35
36
3
33
33-35
36
39
42
3.4 DMX MODE
• Press on MODE and select
Connect
and press on ENTER to confirm.
• Press on UP/DOWN to select
DMX Mode,
then choose the desired DMX mode:
1 Ch
or
3Ch
. Press on ENTER
to store.
• Press on MODE to go back or to meet the waiting time to exit the setup menu.
The tables on page 12 indicate the operating mode and DMX value.
3.5 DMX ADDRESSING
• Press on MODE and select
Connect
and press on ENTER to confirm.
• Press on UP/DOWN to select
Dmx Address,
then choose the desired DMX address:
001 - 512
. Press and hold
to scroll quickly.
• Press on ENTER button to store.
• Press on MODE button to go back or to meet the waiting time to exit the setup menu.
To able to operate the ECLIPSEJZIP with a light controller, adjust the DMX start address for the first a DMX
channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX chan-
nel, adjust the start address 33 on the ECLIPSEJZIP. The other functions of the light effect panel are then
automatically assigned to the following addresses.
An example with the start address 33 is shown below:
